* ELit
Brand: | GEKA |
|---|---|
Model: | ELIT |
Standards
| TS EN ISO 2560-A | E 42 0 RR 1 2 |
|---|---|
| EN ISO 2560-A | E 42 0 RR 1 2 |
| AWS A5.1 | E6013 |
Chemical Composition of Weld Metal % (Typical)
| C | Si | Mn |
|---|---|---|
| 0.07 | 0.3 | 0.5 |
Typical Base Material Grades
- S235JR, S275JR, S235J2G3-S355J2G3, S235JRS1 – S235J2S1, S235JRS2 – S235J2S2, S235JRS1 – S235J2S1, S235JRS2 – S235J2S2
- P235GH, P265GH, P255NH, P235T1 – P355T1, P235T2 – P355T2, P235G1TH, P255G1TH
- L210 – L360NB
Mechanical Properties
| Yield Strength (N/mm²) | Tensile Strength (N/mm²) | Impact Strength (ISO-V/ 0°C) | Elongation ((Lo=5do) (%)) |
|---|---|---|---|
| min. 420 | 510-610 | min. 47 J | min.22 |
Features and Applications
- The mostly used type among the rutile electrodes
- Easy striking
- Spatter and fume formation in low amounts
- Good welding beads
- Electrode coating of high thickness
Current Type
- AC
- DC(-)
Operating Data
| Product Code | Diametré x Length (mm) | Diameter x Length (inch) | Welding Current (A) | Weight g / 100 pcs |
|---|---|---|---|---|
| 3010100003 | ø2,0 x 300 | ø5/64 x 12 | 45 – 80 | 1160 |
| 3010100012 | ø2,5 x 350 | ø3/32 x 14 | 60 – 110 | 2000 |
| 3010100018 | ø3,2 x 350 | ø1/8 x 14 | 100 – 140 | 3220 |
| 3010100024 | ø4,0 x 350 | ø5/32 x 14 | 140 – 180 | 4740 |
| 3010100027 | ø4,0 x 450 | ø5/32 x 18 | 140 – 180 | 6220 |
| 3010100030 | ø5,0 x 350 | ø3/16 x 14 | 170 – 240 | 7640 |
| 3010100033 | ø5,0 x 450 | ø3/16 x 18 | 170 – 240 | 9680 |
Approvals
* ELOX R 309 L
| TS EN ISO 3581-A | E 23 12 L R 3 2 |
|---|---|
| TS EN ISO 3581-A | E 23 12 L R 3 2 |
| AWS A5.4 | E309L-16 |
Chemical Composition of Weld Metal % (Typical)
| C | Si | Mn | Cr | Ni |
|---|---|---|---|---|
| 0,03 | 0,8 | 0,8 | 23,0 | 12,6 |
Typical Base Material Grades
- Used for buffer layer unalloyed or low alloyed steels, also when joining non-molibdenum-alloyed stainless and carbon steels. Joints and mixed joints between austenitic steels.
- Used for mixed joints between austenitic and heat resistant steels.
Mechanical Properties
| Yield Strength (N/mm²) | Tensile Strength (N/mm²) | Impact Strength (ISO-V/+20°C) | Elongation ((Lo=5do) (%)) |
|---|---|---|---|
| min. 440 | 540 – 720 | min.47 J | min. 30 |
Features and Applications
- GeKa ELOX R 309L electrodes are widely used in carbon-stainless steel joints. for example, joining mild or low alloy steels with AISI 304.
- If a service temperature above 370 °C or heat treatment is applied after welding dissimilar steels, embrittlement or cracking may occur. This requires procedural control.
- Ferrite content of weld metal is greater than 8 FN and reduces the possibility of intergranular carbide precipitation. This thereby increases the resistance to intergranular corrosion without the use of niobium.
- Re-drying: 120-200ºC / 2 h.
Current Type
- AC
- DC(+)
Operating Data
| Product Code | Diametré x Length (mm) | Diameter x Length (inch) | Welding Current (A) | Weight g / 100 pcs |
|---|---|---|---|---|
| 3010101058 | ø2,0 x 250 | ø5/64 x 10 | 50 – 85 | 950 |
| 3010101063 | ø2,5 x 250 | ø3/32 x 10 | 60 – 90 | 1540 |
| 3010101073 | ø3,2 x 350 | ø1/8 x 14 | 80 – 120 | 3610 |
| 3010101078 | ø4,0 x 350 | ø5/32 x 14 | 100 – 160 | 5290 |
Approvals
* ELOX R 316 L
| TS EN ISO 3581-A | E 19 12 3 L R 3 2 |
|---|---|
| EN ISO 3581-A | E 19 12 3 L R 3 2 |
| AWS A5.4 | E316L-16 |
Chemical Composition of Weld Metal % (Typical)
| C | Si | Mn | Cr | Ni | Mo |
|---|---|---|---|---|---|
| 0,03 | 0,8 | 0,9 | 19,0 | 11,5 | 2,6 |
Typical Base Material Grades
- EN: X2CrNiMo17-12-2, X2CrNiMo18-14-3, X3CrNiMo17-13-3, X5CrNiMo17-12-2, X6CrNiMoTi17-12-2, X6CrNiMoNb17-12-2, X10CrNiMoNb18-12, G-X2CrNiMo19-11-2
- AISI: 316L, 316Ti, 316Cb
Features and Applications
- Tanks, pipes and equipments made of Cr-Ni-Mo low-carbon steels which are used in food, textile, chemical and paint industries
- Weld metal is resistant to acid, corrosion
- Serviceability at temperatures up to 400°C
- Requirement of Re-drying for min. 2 hours at the temperature 300°C
Mechanical Properties
| Yield Strength (N/mm²) | Tensile Strength (N/mm²) | Impact Strength (ISO-V/+20°C) | Elongation ((Lo=5do) (%)) |
|---|---|---|---|
| min. 355 | 540-670 | min. 47 J | min. 30 |
Current Type
- AC
- DC(+)
Operating Data
| Product Code | Diametré x Length (mm) | Diameter x Length (inch) | Welding Current (A) | Weight g / 100 pcs |
|---|---|---|---|---|
| 3010101243 | Ø2,0 x 250 | Ø5/64 x 10 | 40 – 70 | 950 |
| 3010101248 | Ø2,5 x 250 | Ø3/32 x 10 | 50 – 90 | 1500 |
| 3010101258 | Ø3,2 x 350 | Ø1/8 x 14 | 80 – 120 | 3480 |
| 3010101263 | Ø4,0 x 350 | Ø5/32 x 14 | 110 – 160 | 5130 |
Approvals
بإمكانك مراسلتنا لإستشارات البناء
